ZOOMit powered by TimTX TrueShape

ZOOMit

ZOOMit: Less distortion, better delineation of tumor borders

MR Diffusion in the prostate
Left: Diffusion, b-value 100 and ADC map, matrix 96 x 128
Right: ZOOMit, Diffusion, b-value 100 and ADC map, matrix 58 x 98
(Image: MAGNETOM Skyra, Kantonsspital Aarau, Switzerland)

ZOOMit is the first clinical application for parallel transmit technology. Powered by Siemens' parallel transmit architecture, TimTX TrueShape, ZOOMit uses dynamic excitation pulses to achieve selective field-of-view (zoomed) imaging, without aliasing artifacts. Imaging is faster, with less susceptibility artifacts and geometric distortions. Zoom into your image to appreciate the smallest details, to improve diagnostic confidence and expand research possibilities.

With ZOOMit, you can:

Image only your selective volume of interest;
achieve faster, higher-resolution imaging,with less susceptibility artifacts and distortions;
Gain additional 20% SNR¹ with TimTX Acceleration²;
Detect and evaluate smaller lesions, especially in areas prone to susceptibility artifacts, for increased diagnostic confidence,
Broaden the scope of clinical MR imaging
Unlock the door to new research opportunities.

Eigenschaften & Vorteile

With ZOOMit you can zoom into the anatomy and shape your image according to the region of interest. This enables the highlighting of regions, organs, or features of an organ.

Overall benefits of the the parallel transmit application ZOOMit

Increase in diagnostics confidence
Open up new MR imaging fields
Expand research possibilities
And, now with TimTX Acceleration² ZOOMit is brought to a new level, providing 20% higher SNR¹

Clinical Benefits: See more details. In less time.

ZOOMit is currently enabled for DWI, BOLD and T2 SPACE 3D imaging. 3D imaging like MSK, spine or brain profits the most from the ZOOMit induced scan time reduction. Diffusion based imaging profits from the significantly increased image quality.

syngo ZOOMit of the inner ear — syngo ZOOMit of the inner ear 47% reduction in measurement time
(NYU Langone Medical Center, New York City, USA)

High resolution 3D imaging, with shorter acquisition times.

ZOOMit can dramatically reduce scan time.In this comparison between conventional and zoomed imaging, scan time is reduced by 45% while maintaining the same high resolution.

MR Diffusion in the prostate — MR Diffusion in the prostate
(Kantonspital, Aarau, Switzerland)

High-quality diffusion-weighted imaging

Quality of DWI is especially crucial when this technique is used for the
detection of smallest lesions of high susceptibility (e.g.skull base, spine, abdomen, pelvis), or when quantification of diffusion restriction is required.

ZOOMit gives exactly that:
Significantly increased image quality in the area of interest. In this example of an MR diffusion in the prostate, the zoomed images have much less distortion and better delineation of tumor borders.

“The conventional DWI sequence in the Head & Neck is very challenging. With TimTX TrueShape, we achieve the same spatial resolution but with shorter echo trains – so we have less distortions.”³

Professor Henrik Michaely, MD
University Medical Center Mannheim, Germany
Dr. Philipp Riffel, MD,
University Medical Center, Mannheim, Germany

excitation stripe

Technical Details:

It is a well-known phenomenon in MR imaging that if the field-of-view (FOV) is smaller than the object, aliasing (foldover artifacts) will occur. This is not an issue in the readout direction, since it can be overcome by frequency oversampling. But oversampling in the phase-encoding direction comes at a cost: longer scan times. This makes the use of phase oversampling unfavorable or impossible in many cases.

With ZOOMit, similar to an optical zoom of a camera, only a reduced FOV in phase-encoding direction (‘stripe’) is excited (see figure below). Consequently, there will be no signal from the non-excited regions and only the small stripe needs to be encoded.
The result: Acquisition time can be reduced while maintaining spatial resolution, or the spatial resolution can be increased - or a combination thereof.

Source: Blasche, M et al, MAGNETOM Flash #49, TimTX TrueShape and syngo ZOOMit Technical and Practical Aspects, Pages 74 – 84 (pdf) 1.85 MB

TimTX TrueShape

Hardware and Software Requirement: TimTX TrueShape

ZOOMit is based on TimTX TrueShape, Siemens’ architecture for parallel transmit (pTX) technology. This technology uses two indepedent transmit channels for fully dynamic RF excitation. Only TimTX TrueShape and ZOOMit together provide selective excitation within a user specified FoV. TimTX TrueShape is designed to break ground for a broad range of new MRI applications. ZOOMit is the first TrueShape application. For further information: www.siemens.com/TrueShape

Rahmenbedingungen

System

MAGNETOM Vida
MAGNETOM Prisma
MAGNETOM Skyra
MAGNETOM Prisma^fit
MAGNETOM Sola^fit
MAGNETOM Vida^fit
MAGNETOM Sola
MAGNETOM Altea
MAGNETOM Lumina

Minimum Software Version

syngo MR D13C

syngo MR D13D

Other

TimTX TrueShape
Please Note: Additional technical pre-requisites may apply. Upon receiving your request, your local Siemens representative will clarify whether your system meets the requirements.

Get a Quote Get a Recommendation

War diese Information hilfreich für Sie?

¹

Results may vary. Data on file.

²Available only with syngo MR E11A. The product may not be commercially available in all countries. Due to regulatory reasons its future availability cannot be guaranteed. Please contact your local Siemens organization for further details.

³The statements by Siemens Healthineers' customers described herein are based on results that were achieved in the customer's unique setting. Since there is no "typical" hospital and many variables exist (e.g., hospital size, case mix, level of IT adoption) there can be no guarantee that other customers will achieve the same results.