Compressed Sensing SEMAC

    

Highly accelerated musculoskeletal imaging in patients with whole joint replacements based on SEMAC (slice encoding for metal artifact correction)1 with Compressed Sensing.

Your benefits:

  • Experience 51%2 shorter acquisition time with CS SEMAC for significant metal artefact reduction in patients with total hip or knee replacement
  • Bring advanced metal artefact reduction in daily clinical routine – with less than 6 minutes per scan1

Rahmenbedingungen

System

Minimale Software Version

syngo MR XA11B: MAGNETOM Sola, Vida, Altea, Lumina;
syngo
MR XA20: MAGNETOM Sola Fit, Vida Fit;
syngo MR XA12M: MAGNETOM Amira, Sempra
syngo MR XA20
syngo MR XA12M

Sonstige

Also available for

  • MAGNETOM Sola Fit
  • MAGNETOM Vida Fit
  • MAGNETOM Prismafit

Optional high-end computing recommended. Not available for MAGNETOM Sempra Tim [96 x 8].

Verwandte Produkte, Dienstleistungen und Ressourcen

1The MRI restrictions (if any) of the metal implant must be considered prior to patient undergoing MRI exam. MR imaging of patients with metallic implants brings specific risks. However, certain implants are approved by the governing regulatory bodies to be MR conditionally safe. For such implants, the previously mentioned warning may not be applicable. Please contact the implant manufacturer for the specific conditional information. The conditions for MR safety are the responsibility of the implant manufacturer, not of Siemens.

2Data on file. Results may vary