syngo Argus 4D VF
/
syngo Argus 4D VF
Automatically created endocardial and epicadial borders with 4D VF analysis tool
Automatically created endocardial and epicadial borders with 4D VF analysis tool
/
With syngo Argus 4D VF (Ventricular Function), a typical ventricular function and mass analysis can be done in less than a minute. This method uses a heart model based algorithm instead of contour tracing.
- Highly accurate volumetric assessment and ejection fraction calculation.
Features & Benefits
Features
- A 4D model can be created with a few mouse clicks by defining the center of the LV apex on an apical short-axis cine, center of the LV base on a basal short-axis cine, mitral valve insertion points on a 2- and/or 4-chamber plane in diastole and systole.
- The model-based algorithm provides within a few seconds the appropriate endo- and epicardial contours on all slices and phases as well as a summary table including various data for volume, function and mass.
- No missing ventricular volume nor additional atrial volume deterioration due to cardiac phase adaptive 4D model.
General Requirements
System
- Biograph mMR
- MAGNETOM Aera
- MAGNETOM Amira
- MAGNETOM Prisma
- MAGNETOM Skyra
- MAGNETOM Verio
- MAGNETOM Vida
- MAGNETOM Verio
Minimum Software Version
syngo MR B15
syngo MR C11
syngo MMWP VE26A
syngo MR D11
Other
Argus Viewer
Please Note: Additional technical pre-requisites may apply. Upon receiving your request, your local Siemens representative will clarify whether your system meets the requirements.
