Compressed Sensing SEMAC
Features & Benefits
Highly accelerated musculoskeletal imaging in patients with whole joint replacements based on SEMAC (slice encoding for metal artifact correction)1 with Compressed Sensing.
Your benefits:
- Experience 51%2 shorter acquisition time with CS SEMAC for significant metal artifact reduction in patients with total hip or knee replacement
- Bring advanced metal artifact reduction in daily clinical routine – with less than 6 minutes per scan1
General Requirements
System | Minimum Software Version |
MAGNETOM Aera | syngo MR XA30 |
MAGNETOM Altea | syngo MR XA11B |
MAGNETOM Amira | syngo MR XA12M |
MAGNETOM Lumina | syngo MR XA11B |
MAGNETOM Prisma | syngo MR XA30 |
MAGNETOM Prismafit | syngo MR XA30 |
MAGNETOM Skyra | syngo MR XA30 |
MAGNETOM Sola | syngo MR XA11B |
MAGNETOM Sola Fit | syngo MR XA20 |
MAGNETOM Vida Fit | syngo MR XA20 |
MAGNETOM Vida | syngo MR XA11B |
Did this information help you?
1The MRI restrictions (if any) of the metal implant must be considered prior to patient undergoing MRI exam. MR imaging of patients with metallic implants brings specific risks. However, certain implants are approved by the governing regulatory bodies to be MR conditionally safe. For such implants, the previously mentioned warning may not be applicable. Please contact the implant manufacturer for the specific conditional information. The conditions for MR safety are the responsibility of the implant manufacturer, not of Siemens.
2Data on file. Results may vary