BioMatrix Body 18

 

Cechy i korzyści

General:

  • Operates in an integrated fashion with the BioMatrix Spine 323 or BioMatrix Spine 723 for body imaging
  • The Beat Sensor is seamlessly integrated into the BioMatrix Body 18
  • Can be combined with further BioMatrix Body 18 coils for larger coverage
  • No coil tuning
  • iPAT-compatible in all directions
  • Dual-Density Signal Transfer enables ultra-high density coil design by integrating key RF components into the local coil
  • SlideConnect® technology for easy coil set up
  • Exchangeable cable design allows a single coil to be used with either a standard-sized cable (95 cm length, standard) or a longer version (165 cm length, available as an option)

Applications:

  • Thorax
  • Heart
  • Abdomen
  • Pelvis
  • Hip
  • Vascular

Possible Combinations:

  • Combination possible with all receive-only coils, e.g.:
  • BioMatrix Head/Neck 20
  • BioMatrix Spine 321 / BioMatrix Spine 722
  • Additional BioMatrix Body 18 coils3
  • Peripheral Angio 363
  • Flex Large 4, Flex Small 4
  • UltraFlex Large 183, UltraFlex Small 183
  • Loop coils3
  • For Radiation Therapy imaging purposes
    • Flex 4 coil(s)
    • Body 18 coil(s)
    • BioMatrix Spine 321, BioMatrix Spine 722 coil

Technical Data:

  • Dimensions:
    • Coil2: 415 mm × 619 mm × 65 mm (L x W x H)
    • Cable: 950 mm (70 cm longer compared to the Body 18)
    • Cable long1: 1650 mm
  • Weight:
    • Coil2: 1100 g
    • Cable: 570 g
    • Cable long1: 850 g
     

 

General Requirements

Minimum Software Version

syngo MR XA20

Other

Please Note: Additional technical prerequisites may apply. Upon receiving your request, your local Siemens representative will clarify whether your system meets the requirements

1

2

3