ARTIS phenoCutting-edge robotic imaging for Interventional Radiology

Fast and easy patient access in case of an emergency:

• A single push of a button moves the C-arm out of the way and back again within a few seconds

• Immediate patient access for IR team and equipment

• Ceiling parking position

ARTIS pheno robotic technology with 9 degrees of freedom for C-arm positioning:

• Flexible positioning and wide reach of C-arm
• Flexible installation, accommodating various room requirements

Flexible and procedure-specific patient positioning thanks to flexible isocenter:

• 2D and 3D imaging in virtually any patient position
• Freely adjustable working height for 2D imaging
• 3D imaging possible even with a tilted tabletop

Sufficient room to navigate complex procedural setups thanks to wide-space C-arm:

• Free space of 95.5 cm¹⁾

• Facilitates imaging in steep angulations

• Suitable for procedures requiring large devices

^{1) Measured with standard/non-U.S. collimator cover}

Creating an ergonomic working environment:

• Versatile patient positioning

• Comfortable working position for the operator

• Aligned movements between system and table

Fast and easy patient access in case of an emergency:

• A single push of a button moves the C-arm out of the way and back again within a few seconds

• Immediate patient access for IR team and equipment

• Ceiling parking position

• Proven, Siemens Healthineers-unique 5-parameter exposure control automatically adjusts tube parameters to optimize dose efficiency with variable detector entrance dose as an additional parameter
• SID and collimation settings are automatically considered
• Structure Scout enables material-specific imaging – tuning the X-ray spectrum according to the material and providing dose savings of up to 51% in fluoroscopy and up to 55% in acquisitions while maintaining the same visibility of iodine1)

^{1) Compared to conventional automatic exposure control (AEC) – e.g. available with Artis Q}

Case Flows can combine multiple manual system settings into just one system interaction – ready to use with a single push of a button.

• Predefined Case Flows can be used to get started quickly
• Personal Case Flows can be created and saved according to your personal preferences
• Case Flows facilitate faster learning and further standardization of procedures

Regardless of procedure, patient size, or C-arm angulation¹⁾: OPTIQ enables constant image quality in support of ALARA²⁾ dose – using a contrast-driven technique based on automatic parametrization and intelligent, self-adjusting algorithms. You can adjust noise and contrast of the image to your personal flavor with OPTIQ.

^{1) within physical limits
2) ALARA = As Low As Reasonably Achievable}

• Proven, Siemens Healthineers-unique 5-parameter exposure control automatically adjusts tube parameters to optimize dose efficiency with variable detector entrance dose as an additional parameter
• SID and collimation settings are automatically considered
• Structure Scout enables material-specific imaging – tuning the X-ray spectrum according to the material and providing dose savings of up to 51% in fluoroscopy and up to 55% in acquisitions while maintaining the same visibility of iodine1)

^{1) Compared to conventional automatic exposure control (AEC) – e.g. available with Artis Q}