Compressed Sensing SEMAC
Highly accelerated musculoskeletal imaging in patients with whole joint replacements based on SEMAC (slice encoding for metal artifact correction)1 with Compressed Sensing.
Your benefits:
- Experience 51%2 shorter acquisition time with CS SEMAC for significant metal artefact reduction in patients with total hip or knee replacement
- Bring advanced metal artefact reduction in daily clinical routine – with less than 6 minutes per scan1
General Requirements
System
- MAGNETOM Aera
- MAGNETOM Altea
- MAGNETOM Amira
- MAGNETOM Lumina
- MAGNETOM Sempra
- MAGNETOM Skyra
- MAGNETOM Sola
- MAGNETOM Sola Fit
- MAGNETOM Vida
- MAGNETOM Vida Fit
- MAGNETOM Prisma
- MAGNETOM Prismafit
Minimum Software Version
syngo MR XA11B
syngo MR XA20
syngo MR XA12M
Other
Optional high-end computing recommended. Not available for MAGNETOM Sempra Tim [96 x 8].
1The MRI restrictions (if any) of the metal implant must be considered prior to patient undergoing MRI exam. MR imaging of patients with metallic implants brings specific risks. However, certain implants are approved by the governing regulatory bodies to be MR conditionally safe. For such implants, the previously mentioned warning may not be applicable. Please contact the implant manufacturer for the specific conditional information. The conditions for MR safety are the responsibility of the implant manufacturer, not of Siemens.
2Data on file. Results may vary