BioMatrix Head/Neck 64

BioMatrix Head/Neck 64 with integrated BioMatrix Tuners: CoilShim technology with integrated shim elements


Características y Beneficios


  • Dual-Density Signal Transfer enables ultra-high density coil designs by integrating key RF components into the local coil
  • Combined coil for head and neck examination for optimized workflow
  • Anterior part removable, designed with 24 elements
  • Posterior part usable without upper part for highly claustrophobic patients, designed with 40 elements
  • Cable-less lower part with DirectConnect™ technology
  • One SlideConnect® plug
  • Lower coil part may stay on the patient table for most of the examinations
  • Cushioned head stabilizers (removable)
  • No coil tuning required
  • iPAT-compatible
  • Detachable double mirror
  • Integrated rear EEG port for up to 128 electrode caps 


  • High resolution head/neck proton imaging
  • MR angiography of the head/neck
  • Functional imaging of the brain/neck

Possible Combinations:
Combination possible with all receive-only coils, e.g.:

  • BioMatrix Spine 321 / BioMatrix Spine 722
  • Body 18
  • Peripheral Angio 363
  • Flex Large 4
  • Flex Small 4
  • UltraFlex Large 183
  • UltraFlex Small 183

Technical Data:

  • 435 mm × 395 mm × 350 mm (L x W x H)
  • 5.4 kg


General Requirements


syngo MR XA10, syngo MR XA20

  • MAGNETOM VidaFit

Please Note: Additional technical prerequisites may apply. Upon receiving your request, your local Siemens representative will clarify whether your system meets the requirements

Not for MAGNETOM Vida Tim [204x32]