ARTIS pheno with surgical table

ARTIS pheno

Špičkové robotické zobrazování pro různé chirurgické obory

Dnešní chirurgická oddělení čelí složitým výzvám. Ekonomické požadavky na zdravotnictví, pokroky v medicíně a výzkumu a náročná konkurence často vedou k investicím do minimálně invazivních operačních technik a podpůrných hybridních operačních systémů. Více než tisíc instalací po celém světě ukazuje, že ARTIS pheno může být v tomto úsilí klíčovým faktorem úspěchu.

Jako jedinečné robotické C-rameno vám ARTIS pheno pomáhá transformovat poskytování péče tím, že hybridnímu operačnímu sálu dodává skutečnou všestrannost. ARTIS pheno vám pomůže se standardními i nejobtížnějšími přístupy a přizpůsobí se velmi různorodým postupům, oborům nebo pozicím pacientů.

Advance your case mix

Between the poles of market demands and given budgets, effective resource management is key. A Hybrid OR must accommodate a multitude of procedures and individual patient conditions. At the same time, it must support the needs of surgeons performing in various disciplines and fulfill the hospital’s current and future requirements.



Range of different procedures supported by ARTIS pheno

Discover the range of different procedures supported by ARTIS pheno – from performing standard surgical procedures to reproducing or inventing leading-edge ones. ARTIS pheno supports your requirements now and in the future.

Yao Fong, MDChi Mei Medical Center, Tainan, Taiwan
Prof. Bernhard Schieffer, MDUniversity Hospital Marburg, Marburg, Germany

Optimize clinical operations

Time-consuming manual workflows, heterogeneous image quality, unwanted variations in procedural outcomes, and staff training needs are obstacles to treatment in the Hybrid OR. From a resource management perspective, unnecessary tasks or workflow steps can lead to unnecessary expenditures and lost productivity.


Up to 83% less manual interaction per Case Flow step.
* E.g., in Case Flow “Device insertions”

ARTIS pheno with procedural intelligence eliminates repetitive input steps or manual adjustment of settings. It enables simplified image-guided surgery and consistent workflows. ARTIS pheno offers intra-operative support, intelligent optimization of image quality in support of ALARA dose, and automated C-arm positioning – so that users may focus on the patient rather than on the imaging system.

Prof. Bernhard Schieffer, MDUniversity Hospital Marburg, Marburg, Germany
Frank Marquardt, MDRotes Kreuz Krankenhaus, Bremen, Germany
Prof. Veit Braun, MDDiakonie Klinikum Jung-Stilling, Siegen, Germany

Maintain infection control

Proper infection control is key for the safety of patients and staff in your hospital. It can be hard to keep up with the vast number of pathogens, however.

Clinician checking the clean surface of the ARTIS pheno
  • Recommendations for cleaning agents
  • Guidance for optimal cleaning procedures

Technical specifications

Installation

Floor-mounted to keep the ceiling free

Minimum room size

35 m2 (377 ft2)

Recommended room size

>= 68 m2 (732 ft2)

Robotic C-arm

9 axes for positioning of the C-arm, SID lift, and Detector + Collimator rotation

Wide space C-arm

130 cm (51") SID and 95.5 cm (37.5") usable clearance for easy patient access and C-arm positioning

Intraprocedural 3D imaging position

Head side and lateral

Working height

Flexible isocenter 104 cm (40.95")10 - 150 cm (59.1")

Max. 3D volume size (diameter x height)

43 cm x 17.5 cm (17" x 7.9") or 32 cm x 23.5 cm (13" x 9.3")

Detector

30 x 40 detector

1
2
3
4
5
6
7
8
9
10