TimCT Oncology

TimCT Oncology uses a sophisticated patient table with excellent position accuracy and a RF shielded table drive as well as Tim (Total imaging matrix) technology: at the same time, local coils with high signal-to-noise ratio (SNR) covering the whole body enable superb image quality and very fast imaging using integrated Parallel Acquisition Techniques (iPAT).

Try

Características e Benefícios

TimCT Oncology is based on axial 2D multi-slice sequences for both T1-weighted FLASH and T2-weighted TSE imaging. The TSE variant can also be combined with syngo BLADE for motion insensitivity. The FLASH variant can also be combined with DIXON to acquire inphase, opposed-phase, water and fat images in one measurement.

 

TimCT Oncology allows a CT-like MR examination:

  • Definition of start point and end point of scan area only
  • No need to plan in multiple steps
  • No need to plan overlapping areas
  • No delay, no measurement pauses during table move
  • No need for composing
     

General Requirements

System

  • MAGNETOM Avanto
  • MAGNETOM Espree
  • MAGNETOM Symphony, A Tim System
  • MAGNETOM Verio
  • MAGNETOM Trio, A Tim System
  • Biograph mMR



Minimum Software Version

syngo MR B17

Other

BLADE, T-class, 18-Channel Configuration
Please Note: Additional technical pre-requisites may apply. Upon receiving your request, your local Siemens representative will clarify whether your system meets the requirements.