- Home
- Imagerie Médicale
- Tomodensitométrie
- Options et mises à niveau
- Clinical software applications
- syngo Dual Energy Hardplaque Display
syngo Dual Energy Hardplaque Display
syngo Dual Energy Hardplaque Display
syngo Dual Energy Hardplaque Display
syngo Dual Energy Hardplaque Display
syngo Dual Energy Hardplaque Display
syngo Dual Energy Hardplaque Display
syngo Dual Energy Hardplaque Display
syngo Dual Energy Hardplaque Display
syngo Dual Energy Hardplaque Display
syngo Dual Energy Hardplaque Display
Enables the identification and automatic removal of calcifications from a CTA image. By therefore differentiating between hard plaques and contrast agent this Dual Energy application helps to display of true vessel lumen without interfering hard plaques.
Fonctionnalités et avantages
syngo Dual Energy Hardplaque Display requires syngo® Dual Energy available on SOMATOM Definition/Definition Flash. With the application syngo® Dual Energy, it is possible to obtain additional information about the chemical composition of body materials. During a Dual Energy scan, two CT datasets are taken simultaneously with kV levels of 80 kV/140 kV or 1100 kV/140 kV, allowing to visualize differences in the energy dependence of the attenuation coefficients of different materials. These images will be combined and analyzed to visualize information about anatomical and pathological structures.
Approche clinique
Data Sheet
General Requirements
System
- SOMATOM Definition
- SOMATOM Definition Flash
Minimum Software Version
syngo 2008C (VE31A)
Other
Please Note: Additional technical pre-requisites may apply. Upon receiving your request, your local Siemens representative will clarify whether your system meets the requirements.