CS-2000i/CS-2100i SystemsBoost the quality and efficiency of your lab with PSI checks

The CS-2000i/CS-2100i Systems minimize preanalytical errors by using multi-wavelength scanning and sample liquid-sensing technologies. By using smartly designed PSI™ technology, the analyzers provide extra operator support—they identify and automatically manage potentially problematic test samples prior to analysis.

  • Detect hemolysis, icterus, and lipemia with a preanalytic scan of patient samples performed at 3 wavelengths: 405 nm, 575 nm, and 660 nm
  • User-defined criteria allows automatic handling of the result
  • Primary tube sample volume check identifies potential inaccuracies caused by improper sample collection
  • Sophisticated cap-piercing technology available for dependable throughput under all conditions1
  • Accept or flag sample results based upon an incorrect tube fill volume according to user-programmable configuration settings
  • Simultaneous multi-wavelength scanning of clotting reactions at 340 nm, 405 nm, 575 nm, 660 nm, and 800 nm

Características y Beneficios

mechanical detection systems
  • Measurement of light transmittance can be made over the entire course of clot formation, not just the end
  • Atypical reaction patterns can be identified easily to aid in determining the correct coagulation reaction result for patients with unusual in vitro clot reactions, such as sepsis and DIC
  • Sophisticated software algorithms record, monitor, and check reaction kinetics to determine the correct clotting time
  • Clotting reactions display the complete clot signature, not just a single data point, for complete test information
Wide optical spectrum
  • Performs coagulation assays using 4 different measurement principles on a single platform
  • All reaction detectors can be used for clotting, chromogenic, immunoturbidimetric, and agglutination assays
  • Reduces effects of interfering substances on the absorbance spectra by automatically selecting the appropriate wavelength
automated maintenance

Intuitive user software and automated maintenance procedures provide for simple operation and increased confidence among staff

  • Fully-automatic user maintenance logging with inspection ready checklist
  • Software supported error management and troubleshooting guide provides condition and actions for resolution
  • Automatic verification with bi-directional LIS connectivity allows results to be uploaded to physicians as soon as they are available

Cap-piercing technology supports clinical and workflow excellence by helping to prevent sample contamination and deliver accurate results1

  • Restricts physical interaction with biohazardous materials and reduces risk of contact with airborne infections
  • Intelligent technology allows for both open and closed samples to be placed on the same rack
Continuous loading of patient samples
  • Enhanced reagent management functions
  • Load up to 40 reagents in the reagent table
Two dimensional barcode input
  • Positive reagent identification
  • Automatic input of PT ISI and reagent lot numbers
  • Automatic input of calibrator and control values
Extended onboard reagent stability
  • Reagent vial-sampling angle reduces reagent dead volume waste to maximize the number of tests per vial
  • Refrigerated reagent table provides longer onboard stability. Reagent vials can frequently remain on the system until depletion. No need to remove!
  • Real-time onboard stability and reagent volume tracking 


Berichrom® Antithrombin III (A)
INNOVANCE® Antithrombin

Dade® Actin®
Dade Actin FS
Dade Actin FSL
Pathromtin® SL

Batroxobin time

Chromogenic assays
Factor VIII Chromogenic
Factor XIII Chromogenic
Berichrom α2 – Antiplasmin
Berichrom Plasminogen


Factor deficiency
Factors II
Factors V
Factors VII
Factors VIII
Factors IX
Factors X
Factors XI
Factors XII

Multifibren® U3
Dade Thrombin

Berichrom Heparin

Lupus anticoagulant
LA1 screening
LA2 confirmation

Protein C pathway
Protein C
Berichrom Protein C
ProC® AcR4
Factor V Leiden
ProC Global4
Protein S Ac

Thromborel® S
Dade Innovin®

Thrombin time
Test Thrombin

Von Willebrand factor
vWF Ag®4

Especificaciones Técnicas


Dimensions: Main unit: Approx. 775mm (W) x approx. 865mm (D) x approx. 675mm (H)

Pneumatic Unit: Approx. 280mm (W) x approx. 355mm (D) x approx. 400mm (H)

Terminal LCD: 317mm (H) × 356mm (W) × 129mm (D)

Weight: Main unit: Approx. 100 kg

Pneumatic Unit: Approx. 17 kg

Terminal: LCD = 5.5 kg; PC = 9.5 kg

Measurement channels

10 reaction detectors for different measurement principles; 4 provide mixing during measurement if required

Simultaneous 5-wavelength photometry in all detector channels (340 nm, 405 nm, 575 nm, 660 nm, and 800 nm)

Sample capacity

50 samples

5 additional STAT positions


Approx. 180 PT tests/hour

Approx. 180 APTT tests/hour

Approx. 180 simultan`eous PT/APTT tests/hour

Approx. 95 simultaneous PT/APTT/AT/DD tests/hour


Access mode: Simultaneous random-access (samples, reaction tubes)

STAT: 5 priority positions

Reaction Tubes

Type: Single reaction tubes

Loading: Automatic continuous-access, 500 reaction tubes onboard