TimCT Angiography

TimCT Angiography employs the revolutionary TimCT Continuous Table move technology for large Field of View angiographies with the smoothest workflow and the most homogeneous image quality.

TimCT Angiography is built on the Tim technology as well as on a highly advanced patient table with high positioning accuracy and a RF shielded table drive.

Try

Eigenschaften & Vorteile

Feautures

  • iPAT compatibility utilizing Tim‘s Matrix coils capabilities
  • Inline subtraction and Inline MIP of complete peripheral runoff images
  • Highest image homogeneity and no boundary artifacts thanks to seamless TimCT scanning
  • Maximum FoV of syngo TimCT Angiography: 205 cm
  • Fast table speed during angiographic measurements up to 50 mm/ s
  • Fast examination time (typically below 1 minute) for TimCT peripheral angiographic exam
  • (40–70 s depending on resolution)

General Requirements

  • MAGNETOM Verio
  • Biograph mMR
  • MAGNETOM Espree
  • MAGNETOM Trio, A Tim System

syngo MR B15

T-class, 18-Channel Configuration
Please Note: Additional technical pre-requisites may apply. Upon receiving your request, your local Siemens representative will clarify whether your system meets the requirements.

Coil
PA Matrix Coil