Sistema de Gasometria RAPIDLab 348EXProporcione testes de cuidados críticos confiáveis e econômicos em ambientes de baixo volume de testes

Obtenha resultados confiáveis para análises críticas com facilidade, eficiência e economia.

O Sistema de Gasometria RAPIDLab® 348EX* é uma solução econômica voltada para laboratórios menores que têm como desafio fornecer resultados rápidos para os testes de cuidados críticos. A operação totalmente automatizada suporta a um throughput de baixo a médio com um analisador fácil de ser usado e que está pronto para gerar resultados precisos, de acordo com a demanda, com um mínimo de envolvimento do operador.  

  • Resultados rápidos e com exatidão em cuidados críticos para testes de sangue total (arterial, venoso ou capilar) e fluido de diálise
  • Com um design intuitivo, apresenta tela touch colorida, scanner de código de barras e acesso no painel frontal para sensores, reagentes e resíduos
  • Tecnologia Proven Ready Sensor® para uma operação confiável e com baixo custo de manutenção
  • Aspiração automática de amostras, calibração e lavagens, que aumentam a eficiência do fluxo de trabalho
  • Seu tamanho compacto se encaixa facilmente no laboratório central e em outros locais de testes

Características e Benefícios

The RAPIDLab 348EX analyzer combines proven Siemens blood gas technology with a range of next-generation system enhancements designed to streamline and simplify day-to-day operations and workflow.

  • Actionable patient test results are available in approximately 60 seconds
  • Small sample size (50 µL–95 µL) suitable for most patients
  • Analyze whole blood and dialysate fluid
  • Whole blood results: pH, pCO2, pO2 Na+, K+, Ca++/Cl-, and hematocrit
  • Dialysate results: pH, pCO2, Na+, K+, Ca++, HCO3-, and ctCO2
  • Test and report only those parameters ordered by the clinician

  • Bar-code reader, for patient/operator ID entry, can be mounted on either side and offers optional setting for continuous-on, single-handing scanning
  • Sample probe aspirates from syringes, capillaries, and QC ampules automatically, without the need for adapters
  • Automatic detection of short samples shifts analyzer into microsample mode, with no operator involvement required
  • Time-tested Ready Sensor® electrodes have a proven track record of performance and long use-life
  • Comprehensive QC materials help verify system performance
  • Automatic calibration routines and wash sequences minimize demands on operators time and attention

  • Intuitive, color, touch screen user interface features large, easy-to-read system icons that display analyzer status
  • One-touch icon selection of sampling mode - syringe, capillary, dialysis fluid, QC
  • Easy navigation to all routine functions from the Ready screen
  • Measurement chamber houses all sensors and is designed for easy access and replacement
  • All reagents are located on the front panel of the analyzer, enabling easy reagent replacement
  • Clear plastic bottles and blue-colored solutions allow at-a-glance checks of fill volumes
  • Minimal maintenance requirements further extend system uptime

  • Economically priced – low cost of acquisition
  • Low operating costs – cost of reagents/consumables will not vary significantly, even if throughput triples from five to 15 samples/day
  • Small footprint saves valuable bench space in smaller labs and point-of-care settings

  • Results can be viewed on-screen, output to the onboard printer, or electronically transmitted to LIS/HIS or RAPIDComm® Data Management System
  • Convenient onboard storage of up to 250 patient test records, and up to 90 results for each level of QC
  • Print calibration and QC summaries for inspection purposes including off-line generated Levey-Jennings reports to document QC performance
  • USB port simplifies data uploads/downloads

When analyzers in remote, decentralized settings are supported by the RAPIDComm Data Management System, point-of-care coordinators can oversee the entire testing process from a central location.

  • Configure, monitor, and control multiple networked RAPIDLab 348EX analyzers
  • Troubleshoot analyzers, standardize test protocols, authorize and certify operators, and enforce QC checks
  • Generate customized reports for accreditation inspections
  • Help ensure testing and regulatory compliance, and improve risk management
  • Connect multiple Siemens point-of-care analyzers – including blood gas, urine chemistry, and diabetes care systems -- through a single interface to the LIS/HIS


Measurable Parameters                       


Blood Gas



Ca++ or Cl–



Calculated Parameters







BEecf, pO2(A-a)         

pO2 (a/A)



Anion Gap

Renal Dialysate

This mode permits measurement of Na+, K+, Ca++,  pCO2 and pH in bicarbonate-based or acetate-based renal dialysis fluids.

Especificações Técnicas

System Overview

Sample Size

Syringe: 95 µL

Capillary: 95 µL

Microsample mode: 50 µL

Sample Type

Whole blood

Dialysate fluid

Analysis time

Approximately 60 seconds to result


Automatic or on demand




2.0–25.0 g/dL



Patient/Operator IDs:                         

Up to 16 characters (alphanumeric)

Sample location:               

Radial, brachial, femoral, cord, arterial line (with RAPIDComm® Data Management System)

Display Interface

     Intuitive, icon-based color touchscreen

Onboard Computer



Up to 250 patient test records

Up to 90 results for each level of QC

Data Export

Via integrated USB port/flash drive to PC, or direct to LIS/HIS or RAPIDComm® Data Management System

Connectivity Options


RS232, LIS1, LIS2, LIS3 protocol


Can be set up for monitoring/control and connectivity via the RAPIDComm Data Management System

Peripheral Interfaces

USB Port

Standard USB 2.0

External Barcode Reader

Standard USB 2.0






max. 85% at 32ºC non-condensing

Barometric Pressure

400-825 mmHg

Power Requirements


80 VA


100–240 V


50/60 Hz



System Dimensions

Weight :

385 mm (15.2 in.)
353 mm (13.9 in.)
382 mm (15.0 in.)
 9.4 kg (20.7 lb)


UL, CSA, IEC, EN-61010, CE Marked with full CB Scheme and all National Deviations. Complies with the IVD directive